China wholesale Fiberglass Insulator Rod - Epoxy fiberglass tube – Fayun
China wholesale Fiberglass Insulator Rod - Epoxy fiberglass tube – Fayun Detail:
Epoxy fiberglass tube is made by good quality glass fiber steeped into epoxy resin of thermostability,which is high quality material as making high voltage electric devices,such as breakers,thimbles,mutual inductors,zinc oxide arresters,etc.
| Inner diameter(mm): | |||||
| Ø24 Ø30 Ø33 Ø36 Ø38 Ø42 Ø46 Ø48 Ø50 Ø52 Ø54 Ø55 | |||||
| Ø56 Ø58 Ø60 Ø63 Ø66 Ø74 Ø75 Ø76 Ø78 Ø Ø80 Ø82 Ø100 Ø105 | |||||
| Ø115 Ø130 Ø140 Ø144 Ø180 Ø1851 Ø94 Ø210 Ø240 Ø245 Ø250 Ø253 | |||||
Other Inside diameter is available.
Outer diameter and length can be made by customers’ specific requirements.
Features
*Non-Corrosive
*Dimensionally Stable
*Lower Life Cycle Cost
*Flame Retardant
*Easy to Fabricate and Install
*Electrically Non-Conductive
*Lightweight/High Strength
*Resists Insect Damage
*High Impact Strength
*Low Water Absorption
*Greater Flexural Strength Than Timber
*Non-Leeching
Physical,mechanical and dielectric property should follow the table below:
| Technical requirement | |||||
| Normal Diameter | Thickness | Length | Tolerance Allowed | ||
| inside diameter | outside diameter | Length | |||
| 30~70 | 3~20 | 500 | ±0.3 | ±0.3 | ±1 |
| 70~150 | 3~20 | 1000 | ±0.5 | ±0.5 | ±2 |
| 150~550 | 10~100 | 2800 | ±0.5 | ±0.2 | ±2 |
| Physical and mechanical parameters | Physical and mechanical parameters | ||||
| Index Name | Unit | Index | Index Name | Unit | Index |
| Density | g/cm3> | ≥1.80 | Density | g/cm3> | ≥1.80 |
| Water absorption | % | ≤0.15 | Water absorption | % | ≤0.15 |
| Intensity of curvature(circling direction) | Mpa | ≥400 | Intensity of curvature(circling direction) | Mpa | ≥400 |
| Intensity of compress | Mpa | ≥98 | Intensity of compress | Mpa | ≥98 |
| Voltage vitality on parallel layer at normal state for 5min | Kv | ≥25 | Voltage vitality on parallel layer at normal state for 5min | Kv | ≥25 |
| Voltage vitalityon vertical layer in the oil at 90°C for 5min | MV/m | ≥12 | Voltage vitalityon vertical layer in the oil at 90°Cfor 5min | MV/m | ≥12 |
Product detail pictures:
Related Product Guide:
With our leading technology as well as our spirit of innovation,mutual cooperation, benefits and development, we will build a prosperous future together with your esteemed company for China wholesale Fiberglass Insulator Rod - Epoxy fiberglass tube – Fayun , The product will supply to all over the world, such as: Lisbon, Johor, kazakhstan, We've more than 10 years exported experience and our products and solutions have expored more than 30 countries around the word . We always hold the service tenet Client first,Quality first in our mind,and are strict with product quality. Welcome your visiting!
By Diego from Finland - 2018.02.04 14:13
The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!
By Dolores from Brisbane - 2017.03.07 13:42
Write your message here and send it to us
