Factory source Epoxy Round Rod - Epoxy Resin Fiberglass Rod Covered with Silicone Rubber – Fayun
Factory source Epoxy Round Rod - Epoxy Resin Fiberglass Rod Covered with Silicone Rubber – Fayun Detail:
Epoxy Resin Fiberglass Rod Covered with Silicone Rubber,inner is Epoxy Resin Fiber glass rod and Silicone Rubber. Widely used in the field of electrical insulation, internal manrod diameter and external silicone rubber thickness can be customized according to customer needs. Epoxy fiberglass rod is an insulating product formed by impregnating an epoxy composite resin with an alkali-free fiberglass yarn through vacuum injection, continuous pultrusion and curing. Fiberglass insulating rod has good electrical properties and mechanical strength, as well as high temperature resistance and corrosion resistance. FRP ROD is made through alkali-free and twist-free glass fiber yarn soaking in epoxy compound glue, and passing the vacuum injection, continuous pulling and pressing, and being solidified. They have good electrical performance and mechanical strength. FRP rod are widely used in freeway; bridge; airport; tunnel; railway station; jetties; underground engineering; sewage treatment plant etc.
Technique:Pultrusion
Dimensions:φ16,φ20,φ26,φ36,φ40,φ46,φ80 ect
Length:It’s depend on customer’s request
Material:Epoxy resin and fiberglass, Silicone
Silicone Color:Grey or Red
The Silicone Coating:
- the thickness can provide as per the customer’s request.
- the coat entire rod: end to end; or according to the customer’s requirment.
Characteristic
1.No flaw,crack in the surface and interior, each bar color uniform(green or light yellow).
2.Can withstand the sawing, milling, planning, drilling, lathe and other mechanical processing.
3.Internal thread can be tapping with screw tap, external thread can be polished, but not allowed to bear overload.
4. It has good damping, creep resistance, fatigue resistance, fracture resistance, high temperature resistance, stress corrosion resistance etc.
Fiberglass Rod Specification
Specification |
Item |
Density |
≥2.1 g/cm3 |
Water Absorption |
<0.10 % |
Tensile Strenth |
≥1200 Mpa |
Bending Strenth |
≥900 Mpa |
Compressive Strength (axial) |
≥680 Mpa |
Water Diffusion Test 1min |
12 KV |
Leakage current |
<1 mA |
Dye penetration |
pass after 15mins |
Product detail pictures:
Related Product Guide:
We persist with the principle of "quality 1st, assistance initially, continual improvement and innovation to meet the customers" for your management and "zero defect, zero complaints" as the standard objective. To great our service, we present the products and solutions while using the very good top quality at the reasonable cost for Factory source Epoxy Round Rod - Epoxy Resin Fiberglass Rod Covered with Silicone Rubber – Fayun , The product will supply to all over the world, such as: Manila, Oslo, St. Petersburg, We adopted technique and quality system management, based on "customer orientated, reputation first, mutual benefit, develop with joint efforts", welcome friends to communicate and cooperate from all over the world.
By Patricia from Detroit - 2017.07.07 13:00
We have been cooperated with this company for many years, the company always ensure timely delivery ,good quality and correct number, we are good partners.
By Molly from Kuwait - 2017.11.29 11:09