Top Suppliers Frp Rods For Transformer - Epoxy fiberglass tube – Fayun
Top Suppliers Frp Rods For Transformer - Epoxy fiberglass tube – Fayun Detail:
Epoxy fiberglass tube is made by good quality glass fiber steeped into epoxy resin of thermostability,which is high quality material as making high voltage electric devices,such as breakers,thimbles,mutual inductors,zinc oxide arresters,etc.
Inner diameter(mm): | |||||
Ø24 Ø30 Ø33 Ø36 Ø38 Ø42 Ø46 Ø48 Ø50 Ø52 Ø54 Ø55 | |||||
Ø56 Ø58 Ø60 Ø63 Ø66 Ø74 Ø75 Ø76 Ø78 Ø Ø80 Ø82 Ø100 Ø105 | |||||
Ø115 Ø130 Ø140 Ø144 Ø180 Ø1851 Ø94 Ø210 Ø240 Ø245 Ø250 Ø253 |
Other Inside diameter is available.
Outer diameter and length can be made by customers’ specific requirements.
Features
*Non-Corrosive
*Dimensionally Stable
*Lower Life Cycle Cost
*Flame Retardant
*Easy to Fabricate and Install
*Electrically Non-Conductive
*Lightweight/High Strength
*Resists Insect Damage
*High Impact Strength
*Low Water Absorption
*Greater Flexural Strength Than Timber
*Non-Leeching
Physical,mechanical and dielectric property should follow the table below:
Technical requirement | |||||
Normal Diameter | Thickness | Length | Tolerance Allowed | ||
inside diameter | outside diameter | Length | |||
30~70 | 3~20 | 500 | ±0.3 | ±0.3 | ±1 |
70~150 | 3~20 | 1000 | ±0.5 | ±0.5 | ±2 |
150~550 | 10~100 | 2800 | ±0.5 | ±0.2 | ±2 |
Physical and mechanical parameters | Physical and mechanical parameters | ||||
Index Name | Unit | Index | Index Name | Unit | Index |
Density | g/cm3> | ≥1.80 | Density | g/cm3> | ≥1.80 |
Water absorption | % | ≤0.15 | Water absorption | % | ≤0.15 |
Intensity of curvature(circling direction) | Mpa | ≥400 | Intensity of curvature(circling direction) | Mpa | ≥400 |
Intensity of compress | Mpa | ≥98 | Intensity of compress | Mpa | ≥98 |
Voltage vitality on parallel layer at normal state for 5min | Kv | ≥25 | Voltage vitality on parallel layer at normal state for 5min | Kv | ≥25 |
Voltage vitalityon vertical layer in the oil at 90°C for 5min | MV/m | ≥12 | Voltage vitalityon vertical layer in the oil at 90°Cfor 5min | MV/m | ≥12 |
Product detail pictures:
Related Product Guide:
Our pursuit and corporation aim should be to "Always satisfy our consumer requirements". We carry on to build and style and design remarkable quality items for both our outdated and new clients and reach a win-win prospect for our clients at the same time as us for Top Suppliers Frp Rods For Transformer - Epoxy fiberglass tube – Fayun , The product will supply to all over the world, such as: Zambia, Irish, Porto, With a team of experienced and knowledgeable personnel, our market covers South America, the USA, the Mid East, and North Africa. Many customers have become our friends after good cooperation with us. If you have the requirement for any of our goods, make sure you contact us now. We're looking forward to hearing from you soon.
By Miguel from Japan - 2017.11.29 11:09
In general, we are satisfied with all aspects, cheap, high-quality, fast delivery and good procuct style, we will have follow-up cooperation!
By Lisa from Zambia - 2017.02.14 13:19
Write your message here and send it to us